Blog

• March 24. 2021

Each letter has one or more meanings, such as FAG bearings, 1. Pre-code The front code R is placed directly before the basic code of the bearing, and the rest of the front code is separated from the basic code with a small dot. GS—thrust cylindrical roller bearing race. Example: GS.81112 K-The combination of rolling element and cage. Example: The combination of thrust cylindrical roller and cage K...

• November 05. 2020

1. When installing the bearing, the bearing oil seal should be cleaned and then coated with clean high-quality lubricating oil. 2. When installing the bearing, it should be evenly stressed and not directly hammered. If the interference fit is large, the bearing should be put into mineral oil and heated to 90℃~~110℃, and then installed immediately. 3. The warehouse where the bearings are stored sho...

• November 05. 2020

1. When disassembling the bearing, please wear protective clothing and goggles; 2. When using a puller to disassemble the bearing, make sure to select a suitable puller with sufficient pulling force to reduce the risk of puller overload. Overloading of the puller may cause breakage of the mechanical arm or shaft, which may injure the operator; 3. When disassembling, use a protective cover to wrap ...